aqprox! appIP01WV4, Руководство пользователя, Страница: 19 / 129

17
English
2.2 Rear Panel
LAN: RJ-45/10-100 base T
Power: DC 5V/2A power supply
Network Light: The green LED will on when connect to the network, the
yellow LED will blink when data transferred
Audio Output: The jack is used to plug external speaker
I/O PINS: 1 Output A 2 Output B 3 Alarm input 4 Input (GND)
2.3 Botton View
RESET BUTTON: Press and hold the RESET BUTTON for 15
Seconds, then the IPCAM will be reset back to the factory default
Parameter. (Please keep the power on when do RESET)
There are some stickers at the
bottom of IPCAM, such as MAC
address sticker, QC sticker etc.
If your camera does not have
these stickers, it may be a fake one,
fake IPCAM could not use the origi-
nal firmware and obtain our good
after sale service.