Aqara Camera Hub G2H, Руководство пользователя

Страница: 7 / 12

3. Add camera
Connect to Aqara Home
Open the Aqara Home app, and click “+” on the upper corner of the homepage. Select
ћ( - 0Ф ќя)*+ -/ $/./# +++-*(+/.юȅ -/# 1$ $.*)) /
successfully, the blue indicator light will be always on.
Connect to Apple HomeKit
Open Apple Home app, click “+” on the upper right corner, and then enter the “Add
Accessory” page. Scan or manually enter the HomeKit Setup Code at the bottom of the
camera to bind the camera to HomeKit.
If the device failed to be added, please check the following steps:
Failed to add to HomeKit guide:
* “Failed to add accessory”. Due to multiple adding failures, the error information of iOS cache cannot be
removed. Please restart the iOS device and reset the camera;
Ѻћ ..*-4'- 4 ќюȅ -- ./-/$)"/# $ 1$ )- . //# ( -я4*0)()0''4
* Please make sure the camera is connected with the 2.4GHz Wi-Fi network.
* Wi-Fi name or password may contain special characters. Please replace them with ordinary characters
and try again.
* The camera does not support the WAP/WAP2 Wi-Fi network.
* The camera cannot recognize the QR code generated by the phone. Please make sure the screen of the
phone is not less than 4 inches, and cannot scan the QR code under back-lighting.
* Please check whether the router turns on the Wi-Fi connection watcher function, which causes the
network connection failures.
* Please check whether the router turns on the AP isolation function, which causes the phone cannot
search the camera within LAN.
* It is recommended not to connect it to a bridge network.
04