IBB-05F
9
2013/04/22
TROUBLE SHOOTING
1. If your induction range seems to be working improperly, it doesn't necessarily mean it's defective.
In all cases, check the following points.
2. If you fail to identify the problem, contact after-sales service without delay.
If......
It might be caused by......
No indication light when power "on"
Cable/terminal block is loosed
Tripped circuit breaker or blown fuse at power panel.
Power supply stopped.
Heating indicator does not light-on,
Unsuitable cooking vessel.
Appliance fails to heat up
Cooking vessel is not centered on glass top.
Cooking vessel is smaller than 4.75”.
Over-heating protection is activated.
Appliance suddenly stops heating
during operation.
High ambient temperature.
Air entrance or outlet blocked.
Over-heating protection activated.
Error-Code: by beeper & by display
Definition
error-code by beeper
error-code by display
No pot/pan in 60seconds
beeper for 60seconds
(30 slow beeper)
without display
NTC-sensor (on heating-coil) is open
or short
1long 2short
"E"
Heating an empty pot
19short 1long
"h" (in order to confuse with "H"
power level, this over-heat error-
code, is a Minuscule (small caps)
Over Voltage Protection
1long 4short
"U"
AC current circuit is open
1long 11short
"C"
IGBT NTC-sensor is open/short, or
over-heat
1long 7short
"F"
