4
Cleaning should be done Daily.
DO NOT USE ANY
Always ask and check the following:
1.
Remove door by pulling it, in an upward direction. Start the lifting motion with the door in the open
position.
2.
In order to effectively clean the interior of the unit, you will need to remove all four Corner Rack
Supports, which are fastened with 2 thumbscrews each.
3.
To remove the Corner Rack Supports (Item B in Fig.1), turn the thumbscrews in a counter-
clockwise direction. Repeat the process for all four Corner Rack Supports. Note that each Corner
Rack Support is fastened by two thumb screws which are shown by (ItemAin Fig.1)
4.
Clean with warm soapy water and a soft cloth only.
5.
ammonia, alcohol, or chlorine type cleaner will cause cracking of the enclosure
and door(s).
6.
Once the interior of the cabinet, along with Corner Rack Supports have been cleaned in the
fashion described above, re-install all four of them using the thumbscrews provided with the unit.
1.
Is the unit connected to a live power source of the proper voltage?
2.
Check the circuit breaker.
3.
Is power switch ON and light glowing?
4.
Check the rating label. Is the unit connected to the correct power source?
5.
If the above checks out, and you still have problems, call anAPW Wyott authorized service agent.
TROUBLESHOOTING
1
77612021
TOP
1
2
77612012
TOP SUB ASSEMBLY
1
3
85830
HEATING ELEMENT
1
4
69127
HIGH-LIMIT SAFETY SWITCH
1
5
85836
BLOWER MOTOR / FAN ASSEMBLY
1
6
75916
LAMP, 40 W, COATED
1
7
46879
LAMP SOCKET
1
8
66725
LIGHT GUARD WIRE RACK
1
9
88890
THUMBSCREW FOR LIGHT
1
10
69128
THERMOMETER
1
11
77612027
PLASTIC DOOR
1
12
77612026
DISPLAY RACK
2
13
89408
MAIN SWITCH, LIGHT ROCKER
1
14
89101
STRAIN RELIEF BUSHING
1
15
55947
POWER CORDSET
1
16
69155
TEMPERATURE CONTROL THERMOSTAT
1
17
89499
INDICATOR KNOB
1
18
77612033
CORNER RACK SUPPORT
4
19
77612041
THUMB SCREW FOR RACK SUPPORTS
8
ITEM PART NUMBER
DESCRIPTION
QUANTITY
REPLACEMENT PARTS LIST - DWC-17 WARMING CABINET
