APV SPX DELTA DKR2, Руководство по эксплуатации

Страница: 19 / 45

14
Leakage reduction for DKR ball valve
If the valve is not dismantled from the pipeline for the installation
of the leakage reduction, it must be guaranteed that the
corresponding pipeline is depressurized!
Leakage reducer compl.
nominal size ref.-No.
DN 25, 1 ” 000 15-28-143/59
DN 40 - 65, 1,5” - 2,5” 000 15-28-144/59
DN 80,100, 3”, 4 ” 000 15-28-145/59
DN 125 000 15-28-146/59
parts item 1 000 58-06-078/13
item 2 000 58-06-119/13
DN 25 - 65, 1 ” - 2,5” item 3 2 x 000 08-39-079/93
DN 80, 100, 3”, 4 ” item 3 3 x 000 08-39-079/93
DN 125 item 3 1 x 000 08-01-160/93
DN 25,1” item 4 000 15-28-143/42
DN 40 - 65, 1,5” - 2,5” item4 000 15-28-144/42
DN 80, 100, 3”, 4 ” item 4 000 15-28-145/42
DN125 item 4 000 15-28-146/42
Installation of the leakage reducer
- Remove the two hexagon screws (A) and pull out the
shaft bearing (C) by careful turning.
- If the leakage reducer is not equipped with the guides (3) and the
two O-rings (1, 2), these parts can carefully be dismantled from
the shaft bearing (C) and used.
- Lightly grease O-rings (1, 2) before their installation.
!!! Do not use grease containing mineral oil for EPDM seals !!!
- Slide the complete leakage reducer instead of the shaft bearing
over the shaft pivot (B) and tighten it with the hexagon screws (A)
at the housing flange (D).
Double-Seat Ball Valve with Cleaning Connection
DELTA DKR 2
Operating Manual : Rev. 7
11. Service Instructions
UK