Australian Pipeline Valve - Installation, Operation and Maintenance Manual
3
IRON GATE & GLOBE VALVES - SL201, SL600, SL601
S A F E T Y I N F O R M A T I O N
The following general safety information should be taken in account in addition to the specific warnings
and cautions specified in this manual. They are recommended precautions that must be understood and
applied during operation and maintenance of the equipment covered in this I.O.M.
This manual provides instructions for storing, general servicing, installation and removal of gate and
globe valves.
APV and it’s resellers refuse any liability for damage to people, property or plant as well as loss of
production and loss of income under any circumstances but especially if caused by: Incorrect installation
or utilisation of the valve or if the valve installed is not fit for intended purpose. It is the sole
responsibility of the user to ensure the valve type and materials are correctly specified.
To avoid injury, never attempt disassembly while there are pressures either
upstream or downstream. Even when replacing stem packing, caution is necessary
to avoid possible injury.
To prevent valve bending, damage, inefficient operation, or early maintenance
problems, support piping on each side of the valve.
• A valve is a pressurised mechanism containing energised fluids under pressure and
consequently should be handled with appropriate care.
• Valve surface temperature may be dangerously too hot or too cold for skin contact.
• Upon disassembly, attention should be paid to the possibility of releasing
dangerous and or ignitable accumulated fluids.
• Ensure adequate ventilation is available for service.
