SIDE ENTRY 2P TRUNNION BALL VALVES API6D STANDARD - FS9000 SERIES
Australian Pipeline Valve - Installation, Operation and Maintenance Manual
5
S A F E T Y I N F O R M A T I O N
The following general safety notices supplement the specific warnings and cautions appearing elsewhere
in this manual. They are recommended precautions that must be understood and applied during operation
and maintenance of the equipment covered herein. This manual provides instructions for storing, general
servicing, installation and removal of ball valves.
Do not attempt to disassemble a valve while there is pressure in the line. Make sure
both upstream and downstream pressures are removed. Disassemble with caution in
the event all pressures are not relieved. Even when replacing packing rings, caution
is necessary to avoid possible injury.
To prevent valve distortion, inefficient operation, or early maintenance problems,
support piping on each side of the valve.
• A valve is a pressurised device containing energised fluids and should be handled
with appropriate care.
• Valve surface temperature may be dangerously too hot or too cold for skin contact.
• Upon disassembly, attention should be paid to the possibility of releasing
dangerous and or ignitable accumulated fluids.
• Adequate ventilation should be available for service
Do not use the ball valve in process conditions where the pressure, temperature,
media and other technical conditions exceed the limitations set by the valve’s
specifications. When handling fluids that could cause damage to human health, the
environment or property, the necessary safety precautions to prevent risks must be
taken.
APV and it’s resellers refuse any liability for damage to people, property or plant as well as loss of
production and loss of income under any circumstances but especially if caused by: Incorrect installation
or utilisation of the valve or if the valve installed is not fit for the intended purpose. It is the sole
responsibility of the client to ensure the valve type and materials are correctly specified.
