APV DELTA SW4, Руководство по эксплуатации

Страница: 9 / 41

UK
Single Seat and Change-over Valve
DELTA SW4
Operating manual UK - rev. 3 4
4.1. Valve position indication (fig. 4.1.)
- Alternatively to the Control Unit, proximity switch holders (PSH)
for the valve position indication can be mounted on the actuator.
Proximity switches to signal the limit position of the valve seat
can be installed at the proximity switch holder if required.
We recommend to use our APV standard type:
Three-wire proximity switch
Operating distance: 5mm / diameter: 11mm
Operating voltage: 10 - 30 V DC
pnp positive switching, closing function
Installation ,,non-flush"
Using a valve position indicator other than APV, we cannot accept
any liability for a faultless function.
4.2 Control Unit (fig. 4.2.)
For the start-up as well as assembly and disassembly of the
different designs please use the respective manual.
The following different designs are available:
- An adapter is required to install the control unit on the SW4 valve.
valve position indication
fig. 4.1.
fig. 4.2.
CU3 Control Unit
CU4 Control Unit
Direct Connect
reference number:
CU41-S-Direct Connect
08 - 45 - 100/93; H320460
Profibus
reference number:
CU31-Profibus
08 - 45 - 001/93; H315495
Device Net
reference number:
CU31 Device Net
16 - 31 - 240/93; H209422
AS-Interface 2.1
reference number:
CU31 AS-interface 2.1
08 - 45 - 020/93; H315507
Benennung:
reference number:
CU3 - adapter SW4 / M4
08-48-480/93; H315806
Benennung:
reference number:
CU4-S-adapter for DN25/1”-100/4”
08-48-600/93; H320474
4. Auxiliary Equipment
DELTA SW4 - UK-3.qxp 23.04.2009
www.sks-online.com
www.sks-webshop.com