APV AS 1200 M1, Руководство по эксплуатации

Страница: 12 / 32

12
8 OPERATING MANUAL
8.1 IMPLEMENT DESCRIPTION
The Tined Weeder AS 300 M1 | AS 600 M1 | AS 900 M1 | AS 900 M1 Scissors folding | AS 1200 M1 is a
soil tillage implement that can be hitched onto a towing vehicle on the three-point hitch.
8.1.1 INSTRUCTIONS ON THE AS 300 M1
The AS 300 M1 tined weeder is not foldable and has no hydraulic system.
Please note that the AS 300 M1 may only be combined with the Single Disc Spreader ES and Multi-
Metering System MDP.
8.2 MOUNTING ON THE TRACTOR
Under difficult operating conditions, additional wheel weights can be useful. Please also refer to the
operating manual from the tractor manufacturer.
The tractor should be equipped with sufficient ballast weight at the front to ensure the steering and braking
capacity. At least 20% of the empty vehicle weight is required on the front axle.
The lifting links must be adjusted to the same height on the left and on the right. The implement must be
mounted on the 3-point linkage of the tractor.
Mount the top link so that it slants down towards the tractor during operation. (Observe the specifications
from the tractor manufacturer.)
Adjust the side rods so that the implement can swing freely on the field, but is fixed when the implement
is lifted.
8.3 SAFE PARKING AS 300 M1
On machine variant AS 300 M1 (Figure 3), first
lower the rear parking support (as shown in Figure
7). The support leg must be secured with the spring
cotter on the bolt to prevent accidental loosening.
The parking area must be suitable for parking the
implement, i.e. have a firm and level surface so that
the stands do not sink in and the harrow doesn't roll
away.
Figure 3: AS 300 M1
8.4 SAFE PARKING AS 600 M1 / AS 900 M1 RIGID
On the implement versions AS 600 M1 (Figure 4) and AS 900 M1 rigid (Figure 5), you must first fold down
the two parking supports (as shown in Figure 6). The rear parking stand must also be moved down. All of
the stands must be secured with the spring cotter on the pin to prevent accidental loosening. The parking
area must be suitable for parking the implement, i.e. have a firm and level surface so that the stands do
not sink in and the harrow doesn't roll away.