Aputure Nova P600c, Руководство по эксплуатации продукта

Страница: 15 / 24

2.3 Short press the MENU button to enter the system of menu interface, as shown
below.
2.3.1 Output Mode
2.3.2 DMX Mode
Press the MENU Button to enter the menu interface, rotate the INT wheel and short
press to enter the Output Mode. In the output mode interface, you can choose
Constant Output Mode and Max Output Mode. Constant out put mode can maintain
the brightness output during the process of changing the color temperature. Max
Output Mode can make Nova P600c perform the current maximum power output.
Press the MENU Button to enter the menu interface, rotate the INT wheel and short
press to enter the DMX mode, rotate the INT wheel to select DMX Address/DMX Profiles
/DMX Loss Behavior, and then short press the INT wheel to confirm the selection.
DMX Address
： Rotate the INT wheel to change the DMX channel (001-512).
DMX Profiles: Rotate the INT wheel to select 1: CCT&RGB, select 2: CCT&HSI..., a total of
20 built-in DMX models.
DMX Loss Behavior
：
Rotate the INT knob to select Black out /fade to Black /Hold last
setting/ Hold 2 min& fade Out.
1
） Black out -when the DMX signal is lost, it will be Black out.
2 ） Fade to Black -after DMX signal is lost, it will fade to Black in 60 seconds.
3 ） Hold last setting -After DMX signal is lost, remember the last control setting.
4
）
Hold 2 min& Fade Out -After the DMX signal is lost, keep the last control setting for
two minutes, and then Fade to Black within 60 seconds.
* The fade-out time decreases as the percentage of brightness decreases. When the
brightness output is 100%, the fade-out time is 60 seconds, which decreases in
sequence
* If the signal is reconnected, the DMX console will continue to maintain the signal
output as same as before.
- 14 -