Aputure Light torm LS 600c Pro, Руководство по эксплуатации продукта

Страница: 12 / 24

* The fade-out time decreases as the percentage of brightness decreases. When the Intensity
output is 100%, the fade-out time is 60 seconds, which decreases in sequence.
* If the signal is reconnected, the DMX console will continue to maintain the signal output as s
ame as before.
-11-
Output Mode
Constant Output
Maximum Output
DMX Mode
DMX Address
DMX Loss Behavior
DMX Profile
DMX Termination
Max Output : perform at the maximum possible output throughout the CCT range.
2.1.2
)
DMX Mode
Press the MENU button to enter the menu interface, rotate the select wheel and short
press to enter the DMX mode.
DMX address : LS 600c Pro will set to in DMX Address interface. Press and hold the MENU
for 2 seconds to lock the DMX Address. In the locked state, cannot enter
other interfaces, Press and hold SELECT for 2 seconds to unlock.
DMX Loss Behavior : rotate the select wheel to choose Black out /fade to Black /Hold last
setting/ Hold 2 min& fade Out.
①
Hold last setting -After DMX signal is lost, remember the last control setting.
②
Black out -when the DMX signal is lost, it will be Black out.
③
Fade to Black -after DMX signal is lost, it will fade to Black in 60 seconds.
④
Hold 2 min& Fade Out -After the DMX signal is lost, keep the last control setting for two
minutes, and then Fade to Black within 60 seconds.
DMX Profile : Rotate the Select wheel, and short press to select a desired 8-bit/16-bit DMX
Profile. DMX Termination: toggle Auto-termination on or off.
2.1.3
)
Custom FX
Press the MENU button to enter the menu interface, rotate the select wheel and short
press to enter the Custom FX.