Thank you for purchasing the Light Storm
The Light storm
LS 1/2
is made of 264 SMD lamp beads which are designed and manufactured
carefully to have over 95 CRI value. Delicate design and elaborating production make a robust but
exquisite housing, which can fulfill low forward heat of the fixture.
LS 1/2
offers dual power solutions.
You can use V-Mount or Anton Bauer battery in a location shooting. Besides, adapter attached is for
your indoor shooting.
LS 1/2
is with the ability to adjust the brightness. Two antennas can cover all the
surrounding within 360°. You can also control the brightness of
LS 1/2
by a DMX console which is
under the standard DMX512 protocol. Light storm, the best choice for your shooting.
Foreword
Detailed product manual for Light Storm can be found on the movie solution page on www.aputure.com .
Instructions
Intended use
Intended use of the Light Storm
LS 1/2
means:
The user has read the instructions of this manual.
The user is using the products within the operating conditions and limitations described in this
product manual.
“Improper use” means using the products other than as described in these instructions or under
operating conditions which differ from those described herein.
Please read this product manual carefully.
Keep this product manual. Always iincludes this product manual when passing the products on to
the third parties.
Heed all warnings and follow all instructions in this product manual as stated.
Please do not disassemble or modify the Light Storm
LS 1/2
, or it could result in electric shock or
product malfunction.
Please do not handle with wet hands or immerse in or expose to water or rain, or it could result in
fire or electric shock.
Please do not use the Light Storm
LS 1/2
in the presence of flammable gas, or it could result in
explosion.
Please keep all liquids and flammable gas away from the Light Storm.
Keep away from strong sunlight or other high temperature, or it may explode.
Please do not damage, disassemble, drag or wind power cable. Do not place heavy things on the
Light Storm, or it may cause fire or electric shock.
Please clean the Light Storm
LS 1/2
with a dry cloth.
Use of original Aputure cable accessories is recommended. Please note that this warranty does not
apply to repairs arising out of the malfunction of non-original Aputure accessories, although you
may request such repairs on a chargeable basis.
The product is certificated by RoHS, CE and FCC. Please operate the product in full compliance with
the operation standards. Please note that this warranty does not apply to repairs arising from
malfunction, although you may request such repairs on a chargeable basis.
The instructions and information in this manual are based on thorough, controlled company testing
procedures. Further notice will not be given if the design or specifications change.
-1-
Содержание Light Storm LS 1/2
Страница 1: ...LS 1 2 Product Manual English...
