APURO L715-A, Инструкция по эксплуатации

Страница: 3 / 8

2
Telephone Helpline : 1300225960
Fit the Lid
1.
Slot the lid on top of the appliance
Attaching Labels
1.
Slide the relevant label into the magnetic label holder.
2.
Attach the holder to the side of the appliance.
Operation
1.
Connect the appliance to the mains power supply.
2.
Fill the outer container with approximately 600ml of water.
3.
Carefully place the inner container into the appliance.
4.
Fill the inner container with hot soup and close the lid.
5.
Set the temperature control. The temperature ranges from 1 (lowest) to 12 (highest).
6.
The Power light will come on and the kettle will begin to heat up.
7.
Reduce the temperature to maintain heat levels. To maintain temperature, Apuro recommend the
lowest heat setting possible.
8.
Use a suitable implement to remove the contents of the kettle. DO NOT tip the kettle to remove the
contents.
9.
To turn the appliance Off, set the Temperature Control to ‘0’.
Cleaning, Care & Maintenance
• Always turn off and disconnect the appliance from the power supply before cleaning.
• Clean any spilt food on the appliance immediately.
• Use soapy water and a damp cloth to clean the exterior of the appliance.
• The inner container and lid are machine washable.
• Dry thoroughly after cleaning.
Note: The lid is hinged in the middle. Lift one half of the lid to access the container.
Note: If the desired label is not included, simply write the name of the product on the
reverse of one of the labels.
Note: The inner container must NOT float, even when empty. If the container floats
reduce the amount of water in the outer container.
Note: If necessary, remove any excess water from the outer container.
Note: Kettle is not designed to heat food from cold.
WARNING: Never move or carry the appliance when it is switched on or contains hot
liquid.