APURO CN219-A, Инструкция по эксплуатации, Страница: 10 / 16

10
AU
Telephone Helpline: 1300225960
Troubleshooting
Fault Probable Cause Solution
Unit does not
heat
No power Make sure the machine is plugged in correctly
Switch set to OFF Set the switch to ON
Thermal Protector Switch has
activated
Reset Thermal Protector Switch
Thermostat set to low Adjust the thermostat
Mixing paddle
does not turn
No power Make sure the machine is plugged in correctly
Mixing rod not fitted correctly Ensure mixing rod is correctly fitted
Motor Fault Call Apuro agent or qualified technician
Switch set to OFF Set the switch to ON
Tap leaks Tap not fitted correctly Empty machine and fit tap as per instructions
Build up of debris Empty machine and clean tap as per
instructions
Sealing Gasket needs replacing Call Apuro agent or qualified technician
Water escaping
from boiler
Temperature too high Adjust the thermostat
Tank filled above
MAX
indication
line
Allow machine to cool then empty the tank and
refill to correct level
Sealing gasket needs replacing Call Apuro agent or qualified technician
Product leaks
from bottom of
bowl
The bowl is not fitted correctly Empty machine and re-fit bowl as per
instructions
Sealing gasket needs replacing Call Apuro agent or qualified technician
Machine shuts
down while in
use
The water level in the boiler tank
has fallen below the minimum
( MIN) level
Fill the boiler tank to MAX fill level and reset
Thermal Protector Switch
No water in boiler tank Fill the boiler tank to MAX fill level and reset
Thermal Protector Switch
If the machine malfunctions due to causes other than those listed or the proposed
corrective actions do not solve the problem please call a Apuro agent or qualified technician
Technical Specifications
Model Voltage Power Current
Capacity
(Litres)
Dimensions
H x W x D mm
Weight
CN219-A 230V 50Hz 1006W 4.37A 5 465 x 410 x 280 7.3kg
CN219-A_A5_v1_170605.indb 10 2017/6/5 15:33