Aptiv Digital Passport DCT, Руководство по обслуживанию клиентов

Страница: 61 / 165

Modifying or Clearing Timers
Passport DCT Customer Service Guide
55
.................................................................................................................
....
..
Clearing Timers
This procedure is for clearing timers. Once a timer is cleared, it disappears from the list and if
you change your mind, you must set it again. You may also suspend a timer without clearing
it. For that procedure, refer to Resetting/Resuming Timers, page 53.
To clear a timer for a future program from the program guide
Note: At any time during this procedure, you can elect to cancel this procedure by pressing
the C button. In that event, there are no changes to the timer.
6 Press the A button. One of the following may happen:
• If you receive a display that says your timer overlaps another timer, you can elect to
resolve the overlap or to let Passport DCT resolve the overlap. Refer to Resolving
Timer Overlaps and Issues on page 43 for additional information.
• If you have set parental controls, and this program falls within the parameters of
parental control, you are asked to enter your PIN number. Enter the 4-digit PIN
number.
• If you have set a VCR timer, you see a reminder display for the VCR. Read the
reminder and press the A button to accept the information and close the display.
• If none of the above occurs, go to the next step.
7 The program guide displays the program in yellow with the selected timer symbol inside
the grid with the program name. Press the EXIT button to exit the program guide and
return to the currently selected channel.
1 Press the GUIDE button. The program guide displays.
2 Press the arrow buttons to highlight the program for which you want to clear the timer.
The program displays in the program guide, highlighted in yellow with a timer symbol.