Aptiv Digital Passport DCT, Руководство по обслуживанию клиентов

Страница: 59 / 165

Modifying or Clearing Timers
Passport DCT Customer Service Guide
53
.................................................................................................................
....
..
Resetting/Resuming Timers
The reasons that you would select this procedure are as follows:
• When you wish to change the type of timer (event to VCR or VCR to event)
• When you set a timer and then decide to make changes to the timer (change the type of
instance), you can elect to reset your timer.
• When you have a suspended a timer that you wish to resume it.
The following procedure provides you the required steps to reset or resume your timer.
To reset or resume timers for future programs from the program guide
Note: At any time during this procedure, you can elect to cancel this procedure by pressing
the C button. In that event, there are no changes to the timer.
1 Press the GUIDE button. The program guide displays.
2 Press the arrow buttons to highlight the program to be resumed or modified. The program
displays in the program guide, highlight in yellow with a timer symbol.
3 Press the SELECT button. One of the following happens:
• Passport DCT displays the channel. This means that this is not a future program, it is a
current program.
• One of the following displays appear if you have selected a program with an existing
timer. The example shows a display for a program with an event timer (on left) and a
display for a program with a VCR timer (on right).
Note: If you have selected a PPV program, refer to Modifying or Canceling PPV Purchases
on page 57.