Establish a connection with two parties
Press CONF button
Choose the desired line to join the conference by pressing the corresponding LINE button
2. Cancel Conference:
If after pressing the “CONF” button, a user decides not to conference anyone, press the
current active LINE button
This will resume two-way conversation with the current line
3. End Conference:
Press HOLD to end the conference call and put all parties on hold
To speak with an individual party, select the corresponding LINE key
Phone also supports
Easy Conference mode
. In Easy Conference mode, users can initiate
conference by calling another number when the current line is in talking or conference. Also the
conference can be re-established by pressing the ReConf softkey when the conference is on
hold. Easy Conference mode can be used combined with the traditional ways to establish 3-way
conference.
1. Initiate a Conference Call:
Establish one call
Press CONF button and a new line will be brought up
Dial the number and press SEND button to establish the second call
Press CONF button again or press the ConfCall softkey to establish the 3-way conference
2. Hold Conference:
Networks, Inc. PHONE
Firmware version: 1.0.1.108 Last Updated: 12/2011
During the conference, press HOLD button and the conference will be put on hold
- To resume the conference, press the ReConf softkey
- To split the conference and resume the call with each party, press the
corresponding line key
3. End Conference:
If the users decide not to conference after establishing the second call, press EndCall
softkey instead of ConfCall softkey/CONF button. It will end the second call and the screen
will show the first call is on hold.
During the conference, press EndCall softkey or hang up to end the conference.
NOTE:
The party that starts the conference call has to remain in the conference for its entire
duration, you can put the party on mute but it must remain in the conversation. Also, this is not
applicable when the feature “Transfer on call hangup” is turned on.
When using Easy Conference mode, press SEND button to establish the second call after
entering the number instead of using “#”.
