6
call
+1-847-367-4378
The 300XAC includes
TWO TEST MODES
which change the way your AC Power Source operates.
PROGRAM MODE
-
Allows you to use test steps and memory locations within the AC
Power Source menu. Designed for advanced testing applications.
MANUAL MODE
-
Allows you to run a test quickly using basic test parameters. Does
not use preprogrammed test steps.
1. Turn the power switch ON.
2. From the Set screen, press the MORE soft key. In the next window press the SYSTEM soft key.
3. In the System Parameters Menu, use the
(
,
)
arrow keys to highlight AUTO RUN parameter.
Press EDIT to change the parameter.
4. Press CHANGE to toggle the parameter between PROGRAM and MANUAL mode.
5. Press ENTER to save changes.
6. Continue to adjust parameters according to testing needs.
7. Press EXIT from System Parameters Menu to return to Set screen.
When the AUTO RUN parameter is set to PROGRAM mode, the Set screen will be displayed as
follows:
When the AUTO RUN parameter is set to MANUAL mode, the Set screen will be displayed as
follows:
(Set Screen)
(Set Screen)
SELECT A TEST MODE
WARNING:
LOCATE A SUITABLE TEST AREA WITH A THREE-PRONG, GROUNDED OUTLET.
TEST YOUR THREE PRONG OUTLET FOR PROPER WIRING AND READ THE POWER
CHECKLIST BEFORE USING YOUR INSTRUMENT.
