APsystems Microinverter DS3D User Manual
7
3.APsystems Microinverter DS3D Introduction
APsystems 3
rd
generation of dual microinverters DS3D is reaching unprecedented power
outputs of 2000W to adapt to today’s larger power module. With 2 independent MPPTs,
encrypted Zigbee signal, the DS3D benefits from an entirely new architecture.
The innovative and compact design make the product lighter while maximizing power
production. The components are encapsulated with silicone to reduce stress on the
electronics, facilitate thermal dissipation, enhance waterproof properties, and ensure
maximum reliability of the system via rigorous testing methods including accelerated life
testing. A 24/7 energy access through Apps or web based portal facilitate remote diagnosis
and maintenance.
With a performance and an efficiency of 97%, a unique integration with 20% less components,
APsystems DS3D is a game changer to residential and commercial PV.
Key Product Features:
One microinverter connects to four PV modules
Each channel connects 2 PV modules in series (for PV modules with Voc<60V)
The 2 PV modules in series must reach a total Voc within the Operation Voltage
Range as prescribed in the datasheet, section 8.1
It is recommended to only use PV modules of same brand and same type when
connecting them in series
If the PV module has already a standalone Voc within the Operation Voltage Range
(i.e 96 cells PV modules), then only 1 PV module must be connected per DC input
Maximum output power reaching 2000W
Two input channels with independent MPPT
Maximum reliability, IP67
Encrypted Zigbee communication
Safety protection relay integrated
Single phase microinverter. Possible to install in a balanced 3-phase system
