昱能科技
NO.1 Yatai Road, Jiaxing, Zhejiang, China
浙江省嘉兴市南湖区亚太路 1 号
+86 57383986967 | APsystems.com
3. Installation and usage instructions
Installation Notes: users can use SMT or DIP to connect to ZIGBEE module.
It must be ensured that the interface of the module(VCC,GND,RESET,UART) is accurately
connected with the customer's equipment. Make sure the IPEX interface is properly
connected to the antenna.
Instructions for use: Users can interact with the zigbee module through the serial
port. The user uses the serial port to send data to the zigbee module in the specified format,
and the zigbee module will send the data to the specified slave module through the radio
frequency signal.
Pin Descriptions
Pin name
Pin type
Description
P0_0
Digital I/O
Port0.0
P0_1
Digital I/O
Port0.1
P0_2
Digital I/O
Port0.2 - UART RX
P0_3
Digital I/O
Port0.3 - UART TX
P0_4
Digital I/O
Port0.4
P0_5
Digital I/O
Port0.5
P0_6
Digital I/O
Port0.6
