APS Avalon Accuracy, Руководство пользователя

Страница: 24 / 24

AVALON
Manual - 2018 Revision
Read and follow the instructions before packing and/or using the product
Advanced Parachute Systems Ltd .
Bulgaria, 3400 - Montana , Zahari Stoianov str.44
www.avalonskydive.com
e-mail:
info@avalonskydive.com
Edition
JUNE/2018
Page 24/24
Operations on the main rig each 50 jumps:
Inspection all components:
Harness container check:
- All stitching
- Webbing – tapes – binding tapes – fabric integrity
- Plastic plate integrity
- Hardware no sharp edges no damage
- Grommets no damage
- Replace Main closure loop with new
Accessories:
- Main D-bag stitching, tapes and change rubber stowing bands
- Main bridle & kill line stitching and kill line condition
- Hand deploy pilot chute stitching & mesh & fabric condition
- Main risers and three ring miniforce check and follow the instructions on page 18
of this manual
- Toggles stitching and Pin
3.3 Storage and use:
Textile (polyamids) and others materials (hardware) used in the construction of all parachutes
are sensitive to the following environmental elements.
- Acids (car battery)
- Abrasion
- Chlorine
- Smoke
- Excessive heat 93
0
C (200
0
F) and up
- OIL and grease (polyamids)
- Rodents and pests
- Salt water
- Ultra Violet (Sun)
- Water and humidity
When the parachute is not in use it must be placed in a carry bag and stored in a room where
the temperature is maintained between 15
0
C ( 59
0
F ) and 30
0
( 86
0
F ) C and humidity
between 15% and 70%
3.4 User check-list before jump :
- Verify the packing date on the data-card
- Reserve handle in its pocket, and the correct cable routing without tension
-
Turn automatic opener (AAD) “ON”
- Cut away handle in his pocket and cable routing correctly into housings
- Correct setting of the 3-ring system and loop condition
- Harness main webbing and leg webbing stitching
- Hardware condition (no grease, no corrosion).
- Main and reserve closure loop condition.
- Hand deploy pilot chute bridle routing
- Curved pin extraction force not over 6 kG/12 lbs
- Hand deploy handle in correct position.
When putting rig on back make sure that the harness and leg webbing is not twisted.
Check position and easy access of:
Main hand deploy handle
- Cutaway handle
- Reserve handle