Aprimatic MATIC BOX, Инструкция по использованию и установке

Страница: 17 / 26

17
7.1 Attention in use
7.1.1 At the first time of using the door, please test the driving system to see if it
move well. (Test method: unlock the trolley, pull and push the door by
hand)
7.1.2 Connected with the appropriate power and socket by professionals, and
connected the earthing wire earth.
7.1.3 Using the transmitters in your sight. Do not stand or walk under a moving door.
The transmitters should be out of reaching of children.
7.1.4 Make sure the door out off fire, moisture, electromagnetism and some other
places.
7.1.5 Check al least twice a years to make sure the door is properly balanced an
that all working part are in good condition. Adjust the tensile force of chain.
Add suitable amount of lubricant to active.
7.2
Examination Guide
7.2.1
1 Problem Causes Solution
7.2.2 The chain is noisy. The chain is too loose. Adjust nut-M8 referring to
3.2.C.
7.2.3 The motor does not work. The socket is not well
connect or the fuse is broken.
Check the socket or replace
the fuse
7.2.4 After setting open and close
positions, the motor does
not work.
The screws of fixing the hall
components are loose or
program mistakes
Tighten the screws or
resetting open and close
positions.
7.2.5
The door can’t be closed
Photo beam function
works Cancel the photo beam
function, referring to 6.6
7.2.6 The wall button works well,
but the transmitter doesn’t
work.
No transmitter learning or
transmitter battery is power
off. Code referring to 6.4 or
change new transmitter
battery.
7.2.7 Transmitter distance is
too short.
The transmitter battery is
nearly power off. Change new battery.
7.
Owner’s Guide