1
1
2
3
1
1
2
1
1
2
BEA SA | LIEGE Science Park | ALLÉE DES NOISETIERS 5 - 4031 ANGLEUR [BELGIUM] | T +32 4 361 65 65 | F +32 4 361 28 58 | [email protected] | WWW.BEA-SENSORS.COM
BEA hereby declares that the DM41 is in conformity with the basic requirements and the other relevant provisions of the
directives 2014/53/EU and 2011/65/EU.
The complete declaration of conformity is available on our website.
TROUBLESHOOTING
The door remains
closed.
The LED is OFF.
The sensor power is off.
Check the wiring and the power supply.
The door does not
react as expected.
The door closes and
opens constantly.
Improper output
configuration on the sensor.
The sensor is disturbed by
the closing of the door or
vibrations caused by the
door motion.
The door opens for
no apparent reason.
It rains and the sensor
detects the motion of the
rain drops.
Make sure the sensor is fixed properly.
Increase the antenna angle.
Reduce the field size.
Change the antenna angle.
Decrease the field size.
Install the MRA (rain accessory).
In highly reflective
environments, the sensor
detects objects outside of its
detection field.
In airlock vestibules,
the sensor detects the
movement of
the opposite door.
Change the antenna angle.
For EC countries: according to the directive 2012/19/EU for Waste Electrical and Electronic Equipment (WEEE)
Make sure the door is in automatic mode.
Make sure that the logic of the opening signal on
the door is set to NO.
BE
A
| O
ri
gi
na
l i
ns
tr
uc
ti
on
s
|
47
.0
15
2 / V
1
-
0
2.
17
