background image

77

use and maintenance

SR 50

WARNING

WARNING

LUBRICANT CHART

Transmission oil (recommended):

 

 F.C., SAE 75W - 90 or 

 GEAR SYNTH, SAE 75W - 90.

As an alternative to the recommended oil, it is possible to use high-quality oils with characteristics in compliance with or superior to the A.P.I.
GL-4 specifications.

Mixer oil (recommended):

 

  GREEN HIT 2 or 

 CITY 2T.

As an alternative to the recommended oil, use high-quality oils with characteristics in compliance with or superior to the ISO-L-ETC++, A.P.I.
TC++ specifications.

Fork oil (recommended):

 

 F.A. 5W or 

 F.A. 20W fork oil;

an alternative FORK 5W or FORK 20W fork oil.

If you need an oil with intermediate characteristics in comparison with the 

 F.A. 5W and 

 F.A. 20W or 

 FORK 5W and 

 FORK

20W, these can be mixed as indicated below:

SAE 10W =

 F.A. 5W 67% of the  

 F.A. 20W 33% of the volume, or

 FORK 5W 67% of the  

 FORK 20W 33% of the volume;

SAE 15W =

 F.A. 5W 33% of the  

 F.A. 20W 67% of the volume, or

 FORK 5W 33% of the  

 FORK 20W 67% of the volume.

Bearings and other lubrication points (recommended):

 

 AUTOGREASE MP or 

 GREASE 30.

As an alternative to the recommended product, use high-quality grease for rolling bearings, working temperature range -30°C.... +140°C,
dripping point 150°C... 230°C, high protection against corrosion, good resistance to water and oxidation.

Protection of the battery poles:

 neutral grease or vaseline.

Use new brake fluid only.

Brake fluid (recommended):

 

 F.F., DOT 5 (DOT 4 compatible) or 

 BRAKE 5.1, DOT 5 (DOT 4 compatible).

Use only antifreeze and anticorrosive without nitrite, ensuring protection at -35°C at least.

Engine coolant (recommended):

 

 ECOBLU - 40°C or 

 COOL.

Содержание SR 50 - 1998

































































































Отзывы: