APRILIA SCARABEO 100 4T - 2007, Руководство пользователя

Страница: 8 / 9

64
use and maintenance Scarabeo 50
- Scarabeo 100 4T
REMOVING THE
REAR BRAKE CALIPER
Carefully read page 47 (MAINTENANCE).
When disassembling the brake caliper, be
careful not to damage the pipeline, disc
and brake pads.
♦
Position the vehicle on the centre stand on
a solid and level surface.
♦
Unloose and remove the two screws (1).
Tightening torque of brake caliper screws
(1): 27 Nm (2.7 kgm).
On reassembly of the brake caliper, re-
place the caliper fixing screws (1) with two
new screws of the same type.
Do not actuate the rear brake lever after
removing the brake caliper to prevent the
pistons from falling out of their seats,
causing the brake fluid to leak out.
In this case, contact an
aprilia Official
Dealer that will carry out the required
maintenance operations.
♦
Carefully withdraw the brake caliper (2)
from the brake disc.
After reassembling, repeatedly actuate
the rear brake lever and check the brak-
ing system functioning.
CAUTION
WARNING
CAUTION
WARNING
REMOVING
THE REAR-VIEW MIRRORS
Carefully read page 47 (MAINTENANCE).
♦
Position the vehicle on the centre stand,
on a solid and level surface.
♦
Lift the protective case (3).
Hold the rear-view mirror (4), to prevent
it from accidentally falling down.
♦
Hold the screw (5) and unloose the nut (6)
completely.
♦
Remove the rear-view mirror (4).
CAUTION
2
1
4
3
6
5