APRILIA DORSODURO 1200 2010, Руководство пользователя

Страница: 113 / 136

04_30
04_31
To clean off dirt and mud deposited from painted surfaces, soften caked dirt with a
low-pressure water jet. Sponge off using a car body sponge soaked in a car body
shampoo and water solution (2 - 4% parts of shampoo). Then rinse with plenty of
water, and dry with a chamois leather. To clean the engine outer parts, use degreasing
detergent, brushes and old cloths. Anodised or painted aluminium parts such as forks,
wheel rims, frame, footrests etc. should be washed using water and mild soap. Using
aggressive detergents may damage the surface treatment of these components.
TO CLEAN THE HEADLIGHTS USE A SPONGE SOAKED IN WATER AND MILD
DETERGENT, RUBBING THE SURFACE GENTLY AND RINSING FREQUENTLY
WITH PLENTY OF WATER. REMEMBER TO CLEAN THE VEHICLE CAREFULLY
BEFORE APPLYING SILICON WAX POLISH. DO NOT POLISH MATT-PAINTED
SURFACES WITH POLISHING PASTE. THE VEHICLE SHOULD NEVER BE
WASHED IN DIRECT SUNLIGHT, ESPECIALLY DURING SUMMER, OR WITH THE
BODYWORK STILL HOT AS THE CAR SHAMPOO CAN DAMAGE THE PAINT-
WORK IF IT DRIES BEFORE BEING RINSED OFF.
CAUTION
DO NOT USE WATER (OR LIQUIDS) AT TEMPERATURES OVER 40°C (104°F)
WHEN CLEANING THE VEHICLE PLASTIC PARTS. DO NOT AIM HIGH PRES-
SURE AIR/WATER JETS OR STEAM JETS DIRECTLY TO THE FOLLOWING
PARTS: WHEEL HUBS, CONTROLS ON THE RIGHT AND LEFT SIDE OF THE
HANDLEBAR, BEARINGS, BRAKE PUMPS, INSTRUMENTS AND GAUGES, EX-
HAUST SILENCER, IGNITION SWITCH/STEERING LOCK. DO NOT USE ALCO-
HOL OR SOLVENTS TO CLEAN ANY RUBBER OR PLASTIC SADDLE COMPO-
NENTS: USE WATER AND MILD SOAP.
CAUTION
DO NOT USE SOLVENTS OR PETROL BY-PRODUCTS (ACETONE, TRICHLORO-
ETHYLENE, TURPENTINE, PETROL, THINNERS) TO CLEAN THE SADDLE. USE
113
4 Maintenance