3
AHC 5018 Instruction Manual
EN
• Take the appliance and accessories out the box. Remove the stickers, protective foil or plastic
from the device.
• When using the adapter, put the transformer/ adapter cable into the appliance.
• When using the USB cable, attach the USB plug into the power source and the transformer
cable into the appliance.
• After a few seconds, the charging light goes on to indicate that the appliance is charging.
Charge the appliance for at least 16 hours before you use it for the first time and after a long
period of disuse. When the appliance is fully charged, it has a cordless operating time of up to
45 minutes. Do not charge the appliance for more than 24 hours.
BEFORE THE FIRST USE
USE
CLEANING AND MAINTENANCE
• Comb the beard or moustache before you start trimming.
• Make sure not to move the trimmer to fast the first time you use the appliance.
• Make the guide comb selection according to your request. (3,6,9,12mm). Do not use the
smallest setting at the beginning. You have to get used to the appliance.
• Move the trimmer against the hair growth direction and try to stay in contact with the skin
during trimming.
• Regularly clean the trimming comb by removing it from the appliance and remove the hair.
• You can also use the beard trimmer for trimming a full beard. To do this, attach the shaving
head and shave the beard with slow (controlled) movements.
• Cleaning the clipper blades regularly will maintain their optimal
performance.
• Brush the blades and appliance with the cleaning brush to
remove any hair.
• When you notice the clipper isn’t performing as well. Squeeze
a few drops of oil onto the pad. The enclosed oil is specially
formulated for clippers, it will not evaporate or slow the blades
down.
