Heating Operation (All Models)
To start heating:
1. Set your thermostat to the Heat mode. Depending on the
thermostat, this is accomplished by either manually
moving a switch to the Heat position or digitally selecting
Heat mode with a push button. Consult your thermostat
Owner’s Manual for details.
2. Adjust the thermostat set point to a temperature higher
than the displayed room temperature so that a Heat call is
initiated. Again, consult your thermostat Owner’s Manual
for details on how to do this properly.
When you have correctly initiated a Heat call, the Aprilaire
Zoned Comfort Control Panel will start your heating
equipment. If the equipment does not come on right away it
may be due to the minimum-off time delay. Four minutes
must elapse after the last furnace cycle before it can come on
again. This built in feature ensures that the furnace does not
cycle too frequently, which can reduce the life of your furnace.
Cooling Operation (All Models)
1. To start cooling: Set your thermostat to the Cool mode.
Depending on the thermostat, this is accomplished by
either manually moving a switch to the Cool position or
digitally selecting Cool mode with a push button. Consult
your thermostat Owner’s Manual for details.
2. Adjust the thermostat set point to a temperature lower than
the displayed room temperature so that a Cool call is
initiated. Again, consult your thermostat Owner’s Manual
for details on how to do this properly.
When you have correctly initiated a Cooling call, the Aprilaire
Zoned Comfort Control Panel will start your cooling
equipment. If your air conditioning does not come on right
away it may be due to the minimum-off time delay. Four
minutes must elapse after the last air conditioner cycle before
it can come on again. This built-in feature ensures that the air
conditioner does not cycle too frequently, which can reduce
the life of your equipment.
Emergency Heat Operation
(Model 6303
only
)
There are two options available for operation of Emergency
Heat. The option used with your system is dependent upon
the initial installation performed by your installer.
Содержание Zoned Comfort
Страница 1: ...Owner s Manual...