INDOOR AIR QUALITY FUNCTIONS
HUMIDITY CONTROL (continued)
Manual Mode
In manual mode, it is important to anticipate
a drop in outdoor temperature and to reduce
the setting accordingly to avoid excessive
condensation . Use the table on the right side of
the Humidifier Control screen to determine the
proper RH setting .
4.
Touch the
or
arrows to adjust the
RH accordingly, and then touch
Done
when
finished .
Dehumidification
The thermostat will allow you to set the desired
RH level in your home and can be used to turn
dehumidification on or off .
5.
Touch the
arrow to increase the amount
of humidity the dehumidifier will allow . The
air will be less dry and the dehumidifier will
run less .
6.
Touch the
arrow to decrease the amount
of humidity the dehumidifier will allow . The
air will be less humid and the dehumidifier
may run more .
If dehumidification is done with the air
conditioner, the thermostat will cool up to 3°F
beyond the cooling setpoint for dehumidification .
Note:
Overcooling may not be sufficient to meet
the dehumidification setpoint .
Use the dehumidification adjustment to set the
dehumidification setpoint to 60% when first
installed . Allow dehumidification to run until the
initial setpoint is reached, before deciding if you
want to change the humidity setting .
Your comfort is the best measure of how to
adjust your setting . When first installed, your
dehumidifier has to remove all the moisture that
is initially in your home . The home acts like a
sponge so the moisture in the materials of your
home is at the same level as the air . After drying
the air, the materials of the home will release the
moisture back into the air until they are again at
the same level . As a result, it is not uncommon
for dehumidification to operate for an extended
period of time when it is first installed .
Energy Saving Tip #1:
Adjust the setting to be as high as is comfortable
to reduce dehumidification run time – if it feels clammy or smells damp or
moldy, lower the setting . Set the Dehumidifier Control to
Off
when you open
your windows .
Energy Saving Tip #2:
If your home will be unoccupied for an extended
period during the summer, set the Dehumidifier Control setpoint to 60%
RH and your cooling setpoint as high as you feel comfortable . Consult
appropriate professionals regarding the highest temperature that is safe for
your pets or possessions . This will keep the humidity at a controlled level to
help prevent mold while minimizing the amount of the cooling energy used .
Vacation hold is a convenient way to adjust the dehumidification and cooling
setpoint while you are away .
29
4
5
6
