Aprilaire 8820, Руководство пользователя

Страница: 20 / 23

38 39
USER SYSTEM SETTINGS TABLE
(CONTINUED)
USER SYSTEM SETTINGS TABLE
(CONTINUED)
SETUP MENU SETUP MENU
User system
setting Description
Factory default setting
(bold) and setting range
Program Format Enables the 7 day program . 7-Day
Non-Prog
Reset Service
Reminders
Clears the Change Air Filter, Fresh Air, Dehumidifier, and HVAC
service reminders if they are active and resets the start date to
the current date . Clears the Change Water Panel reminder if it is
active . If the reminder is set to timed, the timer will be reset .
No
Yes
Backlight
Intensity
Set the active backlight intensity . Note: The minimum setting is
40% when Constant Backlight is enabled .
100 Percent
0 to 100 Percent
WiFi Disconnect
and Clear Settings
Disconnects the thermostat from the router and clears the Wi-Fi
settings . Use this to set the thermostat back to provisioning
mode so it can be connected to a new Wi-Fi router .
No
Yes
Turn Off WiFi
Radio
Use to turn off the Wi-Fi radio . Wi-Fi settings will be
maintained .
No
Yes
User system
setting Description
Factory default setting
(bold) and setting range
Unregister the
Thermostat
Unregisters the thermostat from an Aprilaire account . Use this
when the thermostat needs to be registered to a new Aprilaire
account . For instance, if you have purchased a home with the
thermostat already installed, this setting would allow you to
clear the previous registration so that you can register the
thermostat to your account . Note: This option is only available
if the thermostat is configured to be used with an Aprilaire
account .
No
Yes
Display Monitor
Support Module
Sensor
Selects if the temperature or humidity values from support
modules that are configured for monitoring are displayed in the
message center of the thermostat .
No
Yes