5
MOUNT THE VENTILATOR
1.
Select the appropriate brackets, large or small, for mounting the ventilator (see
FIGURE 3
)�
If mounting to the wall or hanging from joists,
use the four small mounting
brackets�
If mounting on or in between the floor joists,
install all four smaller brackets
for 13” on center joists, or two small and two longer brackets for 16” on center joists�
2.
Snap the brackets into the proper locations as shown in
FIGURE 4
� Use the mounting
locations nearest the cover for mounting between floor joists or hanging from rafters.
Use the mounting locations near the bottom of the unit for surface mounting (i�e� to a
flat wall, ceiling surface or bottom of joists).
3.
Screw the ventilator brackets into joists or a strong platform using the #10 x 3/4”
screws provided. The ventilator weighs approximately 15 pounds, so do not secure
into drywall alone�
BETWEEN JOISTS
HANGING
INSTALLATION
SURFACE MOUNT
90-2514
FIGURE 4
– MOUNTING BRACKET POSITIONING
90-2514
FIGURE 3
– BRACKETS
