ANALOG INPUT
y
BALANCED
XLR Balanced input is used for the finest quality sound. Connect your equipment that has a
XLR/Balanced Output by using a dedicated Balanced Interconnect cable.
y
AUX1, 2
Unbalanced source components can be plugged into these inputs, such as FM Tuner, Tape-Out,
VCR-Out.
When the optional Phono Module is installed in DP200, AUX 1 is used as a Phono input.
y
BYPASS
For home theater use only. Connect the main out from your surround processor to this ‘BYPASS’ input.
When in BYPASS mode, the volume control of DP200 is disabled. You should control the volume
through the surround processor.
The display window on the front panel shows “BYPASS MODE”
Another press of BYPASS button returns to normal DP200 status.
Main Output
Both Balanced and Unbalanced outputs are provided for the power amplifier connection. Both outputs can be
used at the same time in case of bi-amping application. We strongly recommend the use of Balanced connection
in normal mode.
* Caution!
FIXED/VARIABLE Output Mode Setting
DP200’s default setting is ‘VARIABLE’ mode. If you want to use DP200 just as a fixed output DAC/Phono amp,
you should change the mode setting switch to a ‘FIXED’ mode. Care should be taken when you change the
setting. Power should be off during the change and a preamplifier should be installed to control the volume in
‘FIXED’ mode operation.
Stello DP200 DAC/PRE
7
