Digital Input
y
For digital input, maximum 4 of inputs are available. Please refer to the table below.
SOURCE
CONNECTION TYPE RECOMMENDED
INPUT RATE
REPRODUCE UPSAMPLING RATE
CD Transport
Digital XLR, Coaxial or Toslink
Upto 96kHz
Upto 192kHz
DVD Transport
Digital XLR, Coaxial or Toslink
Upto 96kHz
Upto 192kHz
HDTV Receiver
Coaxial or Toslink
Upto 96kHz
Upto 192kHz
Satellite
Coaxial or Toslink
Upto 96kHz
Upto 192kHz
Personal
Computer
USB, Coaxial or Toslink
Upto 96kHz
Upto 192kHz
y
When listening to music using a CD transport, balanced digital cable is recommended for the
maximum quality of sound reproduction.
y
If there isn’t any balanced digital terminal on the transport, connection should be made with coaxial
terminal 1 or 2.
y
For a connection with DVD player for a quality two channel sound reproduction, digital cable should
be connected between the output of DVD player and DA220 MK2. DVD transport has coaxial and/or
optical (Toslink) output terminal. You should change the setting of output into ‘PCM’ from the DVD
setup menu. If you fail to set up properly, you can hear a hissing sound which indicates the output
from DVD is not set to PCM mode.
y
In case of HDTV or Satellite settop box, use a RCA type coaxial cable or optical Toslink cable
between the settop and DA220 MK2.
y
For the connection of PC or notebook, use included USB cable. Play any program for the playback
of music or DVD. If you can not hear the sound, you should check the setup of your audio device by
visiting CONTROL PANEL
Æ
SOUND AND AUDIO DEVICES
Æ
AUDIO
Æ
BASIC DEVICE and
select “USB DAC” as your default sound device. Most of the PCs set this value automatically when
DA220 MK2 is plugged in.
The Stello DA220 MK2
5