OPERATION
CD PLAYER
Front Panel
[Fig. 2] The Front Panel Layout
[Fig. 3] The Display Window
STANDBY
Turn on ‘Mains’ power switch located on the rear panel. Red LED above the ‘STANDBY’ switch will
begin to glow. Turn on the unit by pressing the ‘STANDBY’ button once. The LED will change to green
and the CDA200 is now ready for use.
UPSAMPLE
The factory setting for the UPSAMPLE rate is 192 kHz. A red LED indicates the selected rate.
You may select
during play
your favorite sampling rate by pressing the
UPSAMPLE
button.
The selection will alternate between 192 kHz, 96 kHz and 44.1 kHz. A small click sound during
selection is normal.
OPEN/CLOSE
Use this button to open or close the disc tray. Place the CD with printed label side up.
Stello CDA200
7
