Apricus Datalogger DL2, Краткое руководство

Страница: 7 / 12

en
7
4.2 Electrical connection
Carry out the connection of the Datalogger  to other modules in the
order described below:
Î Connect the data cable (VBus
®
,  ) to the controller  . If necessary, extend the
cable using the terminal block included and a common two-wire cable.
Î Plug the mains adapter  into a socket.
Î For a direct connection to a router or a PC, connect the Datalogger to a rout-
er
 or a PC  using the network cable (included with the DL2,  ).
VBus
www
www.vbus.net







Power supply is carried out via an external mains adapter. The supply voltage of the
mains adapter must be 100 … 240 V~ (50 … 60 Hz).
The DL2 Datalogger comes with the mains adapter and the VBus
®
cable pre-con-
nected.
4.3 VBus
®
/ data communication
Terminal connections of the Datalogger
The DL2 Datalogger is to be connected to the controller via the pre-connected
VBus
®
cable. The corresponding terminal allocation is described in the controller
manual.
The VBus
® cable can be extended using the terminal block included and a common
two-wire cable.
The VBus
® cable is pre-connected to the Datalogger terminals

and

. Another
module can be connected to the terminals

and

.
4.4 Connecting the network cable
The DL2 Datalogger can be connected to a computer or a router by using a net-
work cable (CAT5e, RJ45).
Î
Connect the network cable included to the network adapter of the computer
or the router.