Approx appLS09, Быстрая настройка

Страница: 83 / 92

Modify the time interval of Trigger
Level Holding Time
Modify Same Code Output Time Interval
Appendix D: examples for setting.
81
Barcode Scanner Manual
The following examples all use setting codes to set scan
engine. 'Scan XXX' in the text means to
scan 'XXX' setting code.
Example: Set the time interval to 1500ms.
Please read the following setting codes in:
1. Scan 'Enable Setting Code'(If it is already enabled,
user can skip this step).
2. Scan 'Customize'.
3. Scan Data Code '1', '5', '0', '0'.
4. Scan Data Code "Save".
5. Scan "Disable Setting Code". (If you want to continue
using, you can skip this step).
Example: Set the time interval to 1000ms.
Please read the following setting codes in:
1. Scan 'Enable Setting Code'(If it is already enabled,
user can skip this step).
2. Scan 'Customize'.
3. Scan Data Code '1', '0', '0', '0'.
4. Scan Data Code "Save".
5. Scan "Disable Setting Code". (If you want to continue
using, you can skip this step).