Rev. 2.0
1/23/06
Appro WH300 User’s Guide
13
3.
Disengage the three clips that attach the right side of the front bezel assembly to the
chassis and remove. See letter C in the figure.
3.6
Install a 3.5-inch Floppy Drive
1.
Use the finger cutouts on the EMI shield to grasp the shield and remove it from the chassis.
2.
Remove the EMI shield from the 3.5-in device drive Bay (letter A in the following figure).
Move latch to the “unlock” position (letter B in the figure)..
3.
Insert floppy drive into 3.5-inch Device Drive Bay (letter C in the figure)
