Appro NVR-6031, Инструкция по установке и эксплуатации

Страница: 5 / 36

2. The Overview
2.1 The Flank Panel- Right Side
1 2 3
1. Power button.
2. Power & Network LED Indicators:
LED Indicative Color Status Description
Solid Light Booting/ Restart
Power LED Red
Light off While connected to LAN port
Solid Light While connected to LAN port
Blinking While LAN transferring data
Network LED Green
Light off Not connected to LAN
3. Reset button.
Use the end of a paper clip or some other similar object to press and hold the Reset button for at least 10
seconds to restore the factory default settings. If you reset the device, the device will return to factory
defaults, you will lose all your settings.
2.2 The Rear Panel
1 2 3 4 5
1. e-SATA:
The NVR supports an eSATA interface for connecting external storage devices for recording.
2. AUDIO IN/ AUDIO OUT:
The audio in connector is used to connect the audio output from a camera or other devices to the NVR.
The audio out connector provides the unit’s audio signal to a speaker or stereo.
3. VGA interface:
Connect to a VGA monitor.
3