Apposite Linktropy Mini2 Скачать руководство пользователя страница 2

i

Copyright © 2016 Apposite Technologies, Inc. All rights reserved. 

Apposite and Linktropy are registered trademarks of  Apposite Technologies, Inc.

The Apposite logo is a trademark of  Apposite Technologies, Inc.

Apposite Technologies, Inc.

11500 W. Olympic Blvd., Suite 510 | Los Angeles, CA 90064 | www.apposite-tech.com

 OPERATION

P/N. DOC- QSG-LM2-2j

Install the Linktropy Mini

2

 between 

two LAN segments as shown in the 
diagram. By default, the Linktropy 
Mini

2

 acts as a bridge between the 

Ethernet segments connected to the 
LAN A and LAN B ports. Frames 
received on one port are subjected to 
the emulated WAN conditions before 
being forwarded to the opposite port.

Emulation conditions for the WAN link are configured in the Linktropy GUI and operate 
independently in each direction. To set the emulation parameters, use a web browser 
to connect to the Linktropy GUI at the configured management address. All emulation 
parameters are found on the Link Emulation tab. Emulation is disabled until the red 
“Emulation On/Off” button at the top of the screen is pressed. See the 

User’s Guide

 for 

details on Linktropy emulation parameters or click the  

 

  buttons on the GUI for 

information on specific parameters.

 IP ADDRESS CONFIGURATION VIA THE SERIAL CONSOLE

Using the provided DB-9 cable, connect the serial port of a PC running terminal 
emulation software to the CONSOLE port of the Linktropy Mini

2

. Set the serial port 

parameters to 9600 baud, 8 bits, no parity, 1 stop bit, and disable flow control. For 
more details on connecting to the serial console, see the 

Linktropy Mini

2

 Hardware 

Guide

.

Press 

[ENTER]

 

to display a login prompt. At the prompt, log in as “

admin

”. 

There is no password.

linktropy login: admin

Use the following commands to set the IP address, IP netmask, and default gateway 
of the Linktropy Mini

2

 management interface:

mgmt set addr <interface-ip-address> netmask <mask>
mgmt set gw <default-gateway>

IP addresses and netmasks are entered in dotted-decimal format. For example:

linktropy> mgmt set addr 192.168.1.1 netmask 255.255.255.0

Отзывы: