Troubleshooting Guide
Symptom Possible
Problem
Notes
Poor Range
Antenna
Receiver Antenna connected,vertically oriented and placed
preferably at least 7' high and away from metal surfaces.
Antenna will not work inside a metal box.
EMI Interference
Receivers located very close to some computers, certain
motors or battery chargers may cause reception problems.
RF Interference
Check equipment operation at a different location.
Battery
If the remote transmitter has an indicator LED, does it light
brightly when button is pressed? If not, replace battery.
Doesn't Work
Power
Check power to receiver (power LED lights?)
Data Reception
Check that Data LED on receiver flashes when remote
button is pressed.
If Data LED flashes without pressing a remote button, it
may be an interference issue (see above).
If Data LED flashes only when remote button is pressed,
continue down this list.
ID Code Match
Re-"Learn" remote to receiver. MUST BE DONE WITH
ANTENNA REMOVED.
Re-Boot Needed
Remove power from receiver for at least 5 seconds.
Applied Wireless products are designed and manufactured
with pride in the United States of America
Copyright 2007 by Applied Wireless, Inc. All rights reserved.
Specifications subject to change without notice.
A
PPLIED
W
IRELESS
,
I
NC
.
1250 Avenida Acaso, Camarillo, CA 93012
Phone: 805-383-9600 Fax: 805-383-9001
Email: [email protected]
www.appliedwireless.com
Pub. # UG-RCRC6R
Rev. date 09/18
