Receiver Package Information
NC-Normally Closed Contact
C1- Common Contact
NO- Normally Open Contact-
Terminal Strips may be “unplugged” for ease of installation
.
Block Diagram
+12 to 24 VAC or DC
Models: KTX24SSn, KTXW24SSAn, NTX24SSn
where n=number of channels
FCC ID: UY124
“This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.”
INSTRUCTION TO THE USER
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult an experienced radio/TV technician for help.
‐‐‐Reorient or relocate the receiving antenna.
‐‐‐Increase the separation between the equipment and receiver.
Changes or modifications not expressly approved by
Applied Wireless
could void the
user's authority to operate the equipment.
