Applied Radar AR2010, Руководство пользователя

Страница: 59 / 76

USB Stick Synthesizer IEEE 488.2 Command Reference
3. *ESE
<
NRf
>
The
*ESE
(Event Status Enable) command sets the Standard Event Status Enable Register. This reg-
ister contains a mask value for the bits to be enabled in the Standard Event Status Register. A 1 in the
enable register enables the corresponding bit in the Status Register, a 0 disables the corresponding bit
in the Status Register. The parameter value when expressed in base 2, represents the bit values of the
Standard Event Status Enable Register. Table 7.2 shows the contents of this register.
Table 7.2:
*ESE bit mapping
Bit Base 2 Meaning
0 1 Operation Complete
1 2 Request Control (not used)
2 4 Query Error
3 8 Device Dependent Error
4 16 Execution Error
5 32 Command Error
6 64 Not Used
7 128 Power On
Syntax
*ESE Space NRf
?
Allowed Values
The NRf parameter can be any integer in the range of 0 to 255.
Query
*ESE? This query returns the contents of the Standard Event Status Enable Register.
Applied Radar, Inc. Revision 2.0.1 48