Page 9
Time Lapse Operation
The GH1 controller board can be used perform time lapse photography in an unattended mode.
Setting the time lapse interval
To set the time lapse interval (the amount of time between photos), press the RIGHT cursor control
button (on the left side of the controller board). The LCD will then display:
On the bottom line of the LCD, the controller will display the time lapse interval in seconds. Press the
RIGHT cursor button until you position the cursor over the time value digits. Each digit can be increased
(by pressing the UP cursor button) or decreased (by pressing the DOWN cursor button). For example,
the display above shows a 10 second time lapse interval.
Activating the time lapse function
To activate the time lapse function, press the left or right cursor keys to position the cursor to the left of
the ON indication on the LCD. Press the ENTER cursor key (the center key) to activate the time lapse
function. The LCD will then display an asterisk (*) to the left of the ON indicator.