APPLIED ACOUSTICS 101G, Руководство по эксплуатации

Страница: 13 / 18

MiniPod Receiver Operation Manual
RFR-101G-8000/1
__________________________________________________________________________________________________________
___________________________________________________________________________________________________________
Page 13 of 18
Extended Info
The Pod List information can display ex tra information, by selecting ‘Extended Info’ from
the ‘Tools’ menu. If selected , three extra columns will be displayed for each connected
pod.
Bad
A count of invalid messages received from each connected MiniPod.
F/W Rev
The firmware revision running on the connected MiniPod.
Last Error
The time of the last invalid message received from the connected MiniPod.
Modifying MiniPod Configuration
To configure output options, ‘double click’ on the required MiniP od in the Pod List.
Alternatively, highlight the MiniP od in the pod list and press the ‘Edit Selected Pod’ on
the toolbar
The GPS data received from each MiniPod may be sent out of either the same, or
different serial ports, as specified by the user. If the same serial port is specified for
more than one pod, an ID (selected by the user) may be prefixed to the GPS data
transmitted. This enables identification of the MiniPod that the GPS data originated
from. The ID is also prefixed to the UDP data transmitted.