26
Keyboard Layout
3.4
Aftertouch
In
Strum
, bending can be controlled using monophonic aftertouch (also known as channel pressure
on certain controllers). The pitch of the note can be increased in this way by up to one tone
depending on the settings of the
Bend
control of the
Aftertouch
section of the interface. If a chord
was just strummed, the highest note of the chord is bended. If an individual note was just played,
this note is bended.
3.5
Modulation Wheel
The modulation wheel is used to control vibrato.
3.6
Hold Pedal
The hold pedal (MIDI CC 64) can be used either as a hold pedal or to activate alternate strumming
depending on the settings of the
Hold Pedal
section of the interface.
In
Hold Chord
mode, the pedal will hold the chord played by
Strum
as long as the pedal is not
released. If a new chord is detected while the pedal is still depressed, the new chord will be played.
The pedal therefore enables one to do instantaneous chord changes.
In
Alt. Strum
mode, the pedal acts exactly as the first strumming key, MIDI note 71(B4),
described above. As long as the pedal is depressed, all the strumming keys will used the range of
the alternate strum when triggering strings. When the pedal is released the main strum range is
used.
Содержание Strum Acoustic GS-1
Страница 1: ...USER MANUAL ...
Страница 8: ...8 CONTENTS 12 License Agreement 86 ...
Страница 22: ...22 An Overview of Strum Acoustic Figure 9 General architecture of Strum ...