22
AT851 Battery Aging Tester
4.4
Setup the Maximum Voltage [V-max]
Press
Shift
+
V-max
to enter V-MAX setup page.
Two methods are used to input the V-max value:
1
st
: The value can be continually changed from the previews value according to the
knob rotation. The knob rotation magnification can be set in Menu-Knob item.
2
nd
: Using numeric keypad to input value.
4.5
Setup the Maximum Power [P-max]
Press
Shift
+
P-max
to enter P-MAX setup page.
Two methods are used to input the P-max value:
1
st
: The value can be continually changed from the previews value according the knob
rotation. The knob rotation magnification can be set in Menu-Knob item.
2
nd
: Using numeric keypad to input value.
4.6
Von/off Operation
You can set voltage value Von/off to control the input state on/off for electronic load.
When the input voltage reaches the Von value, the load’s input state is on. When the
input voltage reaches the Voff value, the load’s input state is off.
Figure 4-7
Von/off Operation
Input
Voltage
+V)
t
Vlff
Input
Current
+I)
t
Vln
Von/off Setup Procedures:
Step 1
: Press
Shift
+
Von/off
, The V-ON Setup Page displayed.
