Applent Instruments Anbai AT45 Series Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 35

Applent Instruments Anbai AT45 Series Скачать руководство пользователя страница 6

6

AT45xx User's Guide

1.

Unpacking and Inspection

This chapter provides the following information:



Packing List



Power Supply



Operation Environment



Cleaning



Instrument Handle

1.1

Packing List

After you receive the instrument, carry out checks during unpacking according to the following procedure.
Check that the packing box or shock-absorbing material used to package the instrument has not been
damaged.
Referring to the packing list, check that all packaged items supplied with the meter have been provided as
per the specified optioned.
If damaged or accessories shortage, please contact the sales department or our agent.

1.2

Power Supply

AT45xx can only be used in the following power supply conditions:

Voltage

：

90V-260VAC

Power

：

30VA MAX

Warning

: To prevent risk of electric shock, connect the power supply ground

If the user replace the power cord, make sure the power cord to a reliable connection.

1.3

Operation Environment

Ensure the operation environment meets the following requirements

Temperature Range: 0

℃

～

55

℃

，

Humidity: 23

℃

, < 70%RH

Altitude: 0~2000m

1.4

Cleaning

Do not attempt to clean the internal of AT45xx

Warning:
Don’t Use Organic Solvents (such as alcohol or gasoline) to clean the Instrument.

Use a dry cloth or a cloth slightly dipped in water to clean the casing.

1.5

Instrument

Handle

Instrument handle can be adjusted, both hands gripping the handles on both sides, gently pull toboth

sides, and then rotate the handle. The handle can be adjusted to four positions, as shown below:

«
...
4
5
6
7
8
...
»

Содержание Anbai AT45 Series




































Отзывы:

Нет отзывов