RV100 Family User’s Guide
12
4.
Remove the cover mounting screws on the
computer. If necessary, refer to your system
instruction manual for information on removing the
computer cover.
5.
Carefully remove the cover from the computer. The
system motherboard should now be in full view.
To install your Rushmore card, perform the
following steps:
1.
Remove any previously installed graphics card(s)
from the system.
2.
Locate an available PCI expansion slot for the
Rushmore card. If necessary, remove the
expansion slot cover and partner screw using the
appropriate tool.
⌦
WARNING! The Rushmore is static sensitive.
To avoid damage to the card from static
electricity, ground yourself before handling
the card by touching the metal frame on your
computer. This dissipates any static
electricity and prevents damage to sensitive
components.
3.
Hold the Rushmore card by its top edge and slide it
into the available slot. The PCI bus interface
should fit into the slot. Make sure the Rushmore
card is firmly seated in the slot.
4.
Once the Rushmore card is correctly seated in the
slot, secure it with the partner screw.
5.
Replace and secure the computer cover.
6.
Proceed to the monitor cabling section below.
