APPA 36II, Инструкция по эксплуатации

Страница: 21 / 24

20
3-3 AC/DC Voltage Measurement
1. Turning the rotary switch at " V " or “V “ position.
2. Connect the black test lead to the "COM" terminal on the bottom of the meter and the red test lead to the
"
V- Ω " terminal . You can now place the test probes on the conductors to make the measurement.
3-4 Resistance Measurement
1. Turning the rotary switch at " Ω <
"
position.
2. Connect the black test lead to the "COM" terminal and red lead to the " V- Ω " terminal.
3. Verify that the power to the circuit under test is off. Connect test leads to the circuit to make the measurement.
4. Pressing the Ω / < button to select Resistance mode or Continuity mode.
5. At < mode, Built - in buzzer sounds if the resistance of the circuit under test is less than 50 Ω between 50 Ω
to 300 Ω the buzzer maybe sound or off either.