6
1. Using the monitor for the first time
Inserting the batteries
After having unpacked the monitor, insert the batte-
ries. The battery compartment
8
is on the bottom of
the monitor. Insert the batteries (4 x size AAA 1.5 V),
observing the po/- indicated on the housing.
Setting the date and time
1.
After the new batteries are fitted, the year
flashes in the display. Press the M button
3
several times to set the present year. To confirm
the year you want to set, press the MAM & time
combination button
4
.
2.
Now you can set the present month in
the same way, using the M button
3
and
confirm your setting by pressing the MAM &
time button
4
.
3.
Now repeat the instructions above to set the
day, hour and minutes.
4.
Once you have set the minutes and confirmed
the setting, the date/time setting is com-
plete. When the monitor is not in operation,
it displays the time
24
.
The date, however, is only required for the
memory display.
If you want to change the date and time
again, press and hold the MAM & time
button
4
down for approx. three seconds until
the year starts to flash. Now you can enter the
new values as described above.
Selecting the correct cuff
Microlife offers different cuff sizes. Select the cuff
size to match the circumference of your upper arm
(measured by close fitting in the centre of the upper
arm).
If the cuff
9
coming with the monitor does not fit,
please contact your local pharmacist who can order
an alternative size for you
Cuff size
for circumference of
upper arm
S
17 - 22 cm
M
22 - 32 cm
M - L
22 - 42 cm
L - XL
32 - 52 cm
In addition to the soft cuffs in the above-
mentioned sizes, as an alternative, a prefor-
med comfort cuff is available in M - L, one
size fits all.
Use only aponorm
®
cuffs manufactured by
Microlife.
All aponorm
®
cuffs are latex-free.
Connect the cuff to the monitor by inserting the
cuff connector
11
into the cuff socket
6
as far
as it will go.
Selecting the users
Содержание BASIS PLUS BLUETOOTH
Страница 2: ...aponorm Basis Control PLUS 2 10 11...
